Quantcast

[Aerogear-users] iOS Push issue when having multiple Installations

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[Aerogear-users] iOS Push issue when having multiple Installations

Bourillon, Matthias

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Matthias Wessendorf
Hi,

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

-Matthias

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <[hidden email]> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users




--

_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Bourillon, Matthias

Matthias,

Does the behaviour I described makes sense?

In 1.0.0, if one of the token is invalid, can it block the whole push sending to other tokens?

 

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 11:20
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

Hi,

 

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

 

-Matthias

 

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <[hidden email]> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Matthias Wessendorf
I think yes, the problem was the a mix of tokens for different profiles (e.g. dev vs. prod)

-M

On Mon, Jun 6, 2016 at 11:32 AM, Bourillon, Matthias <[hidden email]> wrote:

Matthias,

Does the behaviour I described makes sense?

In 1.0.0, if one of the token is invalid, can it block the whole push sending to other tokens?

 

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 11:20
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

Hi,

 

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

 

-Matthias

 

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <[hidden email]> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users




--

_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Bourillon, Matthias

Matthias,

I wanted to validate this behavior and I just created a script, manually sending a Payload to Apple Push service, 1 by 1 to our 89 installations.
I am getting the same behavior : as soon as a payload is being sent to an invalid token, remaining payloads are not sent to devices. Is this something Apple block on their side?

 

Thanks,

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 12:40
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

I think yes, the problem was the a mix of tokens for different profiles (e.g. dev vs. prod)

 

-M

 

On Mon, Jun 6, 2016 at 11:32 AM, Bourillon, Matthias <[hidden email]> wrote:

Matthias,

Does the behaviour I described makes sense?

In 1.0.0, if one of the token is invalid, can it block the whole push sending to other tokens?

 

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 11:20
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

Hi,

 

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

 

-Matthias

 

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <[hidden email]> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Matthias Wessendorf
are you using the 1.1.0 ? 

I think it should not stop.

Question: how did invalid tokens end up at the server?

On Mon, Jun 6, 2016 at 4:56 PM, Bourillon, Matthias <[hidden email]> wrote:

Matthias,

I wanted to validate this behavior and I just created a script, manually sending a Payload to Apple Push service, 1 by 1 to our 89 installations.
I am getting the same behavior : as soon as a payload is being sent to an invalid token, remaining payloads are not sent to devices. Is this something Apple block on their side?

 

Thanks,

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 12:40


À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

I think yes, the problem was the a mix of tokens for different profiles (e.g. dev vs. prod)

 

-M

 

On Mon, Jun 6, 2016 at 11:32 AM, Bourillon, Matthias <[hidden email]> wrote:

Matthias,

Does the behaviour I described makes sense?

In 1.0.0, if one of the token is invalid, can it block the whole push sending to other tokens?

 

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 11:20
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

Hi,

 

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

 

-Matthias

 

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <[hidden email]> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users




--

_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Bourillon, Matthias

Hello Matthias,

We are still in 1.0.0 as 1.1.0 migration process fails with our instance.

To me, invalid tokens have been added on the server due to App development process during which App with development provisioning profile have registered against the server.

 

If I understand correctly, in 1.1.0, if we have Dev token registered against the server they’ll be discovered invalid by Aerogear server and message sending will not be impacted. Is this right?

 

Thanks,

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 21:17
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

are you using the 1.1.0 ? 

 

I think it should not stop.

 

Question: how did invalid tokens end up at the server?

 

On Mon, Jun 6, 2016 at 4:56 PM, Bourillon, Matthias <[hidden email]> wrote:

Matthias,

I wanted to validate this behavior and I just created a script, manually sending a Payload to Apple Push service, 1 by 1 to our 89 installations.
I am getting the same behavior : as soon as a payload is being sent to an invalid token, remaining payloads are not sent to devices. Is this something Apple block on their side?

 

Thanks,

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 12:40


À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

I think yes, the problem was the a mix of tokens for different profiles (e.g. dev vs. prod)

 

-M

 

On Mon, Jun 6, 2016 at 11:32 AM, Bourillon, Matthias <[hidden email]> wrote:

Matthias,

Does the behaviour I described makes sense?

In 1.0.0, if one of the token is invalid, can it block the whole push sending to other tokens?

 

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 11:20
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

Hi,

 

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

 

-Matthias

 

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <[hidden email]> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Matthias Wessendorf


On Tuesday, 7 June 2016, Bourillon, Matthias <[hidden email]> wrote:

Hello Matthias,

We are still in 1.0.0 as 1.1.0 migration process fails with our instance.


hrm, any pointers?
 

To me, invalid tokens have been added on the server due to App development process during which App with development provisioning profile have registered against the server.

yes!
Please note, dev/prod variant settings should not be mixed, for different reasons

 

 

If I understand correctly, in 1.1.0, if we have Dev token registered against the server they’ll be discovered invalid by Aerogear server and message sending will not be impacted. Is this right?

 

Thanks,

Matthias

 

De : <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users-bounces@lists.jboss.org&#39;);" target="_blank">aerogear-users-bounces@... [mailto:<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users-bounces@lists.jboss.org&#39;);" target="_blank">aerogear-users-bounces@...] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 21:17
À : <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users@lists.jboss.org&#39;);" target="_blank">aerogear-users@...
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

are you using the 1.1.0 ? 

 

I think it should not stop.

 

Question: how did invalid tokens end up at the server?

 

On Mon, Jun 6, 2016 at 4:56 PM, Bourillon, Matthias <<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Matthias.Bourillon@saint-gobain.com&#39;);" target="_blank">Matthias.Bourillon@...> wrote:

Matthias,

I wanted to validate this behavior and I just created a script, manually sending a Payload to Apple Push service, 1 by 1 to our 89 installations.
I am getting the same behavior : as soon as a payload is being sent to an invalid token, remaining payloads are not sent to devices. Is this something Apple block on their side?

 

Thanks,

Matthias

 

De : <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users-bounces@lists.jboss.org&#39;);" target="_blank">aerogear-users-bounces@... [mailto:<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users-bounces@lists.jboss.org&#39;);" target="_blank">aerogear-users-bounces@...] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 12:40


À : <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users@lists.jboss.org&#39;);" target="_blank">aerogear-users@...
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

I think yes, the problem was the a mix of tokens for different profiles (e.g. dev vs. prod)

 

-M

 

On Mon, Jun 6, 2016 at 11:32 AM, Bourillon, Matthias <<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Matthias.Bourillon@saint-gobain.com&#39;);" target="_blank">Matthias.Bourillon@...> wrote:

Matthias,

Does the behaviour I described makes sense?

In 1.0.0, if one of the token is invalid, can it block the whole push sending to other tokens?

 

Matthias

 

De : <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users-bounces@lists.jboss.org&#39;);" target="_blank">aerogear-users-bounces@... [mailto:<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users-bounces@lists.jboss.org&#39;);" target="_blank">aerogear-users-bounces@...] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 11:20
À : <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;aerogear-users@lists.jboss.org&#39;);" target="_blank">aerogear-users@...
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

Hi,

 

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

 

-Matthias

 

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Matthias.Bourillon@saint-gobain.com&#39;);" target="_blank">Matthias.Bourillon@...> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Aerogear-users@lists.jboss.org&#39;);" target="_blank">Aerogear-users@...
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Aerogear-users@lists.jboss.org&#39;);" target="_blank">Aerogear-users@...
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Aerogear-users@lists.jboss.org&#39;);" target="_blank">Aerogear-users@...
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--



--
Sent from Gmail Mobile

_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Aerogear-users] iOS Push issue when having multiple Installations

Bourillon, Matthias
In reply to this post by Matthias Wessendorf

Hello Matthias,

Last week we migrated from 1.0.0 to 1.1.0.

Today, after a Push Notification got sent, we had following errors in logs :

 

16:53:11,978 WARN  [com.notnoop.apns.internal.ApnsConnectionImpl] (MonitoringThread-1) Received error for message that wasn't in the cache...

16:53:11,978 WARNING [org.jboss.aerogear.unifiedpush.message.sender.APNsPushNotificationSender] (MonitoringThread-1) Internal cache size exceeded, new size is: 150

16:53:11,978 SEVERE [org.jboss.aerogear.unifiedpush.message.sender.APNsPushNotificationSender] (MonitoringThread-1) Error sending payload to APNs server: com.notnoop.exceptions.ApnsDeliveryErrorException: Failed to deliver notification with error code 8

                at com.notnoop.apns.internal.ApnsConnectionImpl$2.run(ApnsConnectionImpl.java:199) [apns-1.0.0.Beta6.jar:]

                at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_75]

 

Does this means some invalid tokens were found?

In that case, do they get deleted from Installations and is the Push server able to recover by himself and send other push to other tokens?

Or do we need to re-send the message again ?

 

Thanks,

Matthias

 

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 12:40
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

I think yes, the problem was the a mix of tokens for different profiles (e.g. dev vs. prod)

 

-M

 

On Mon, Jun 6, 2016 at 11:32 AM, Bourillon, Matthias <[hidden email]> wrote:

Matthias,

Does the behaviour I described makes sense?

In 1.0.0, if one of the token is invalid, can it block the whole push sending to other tokens?

 

Matthias

 

De : [hidden email] [mailto:[hidden email]] De la part de Matthias Wessendorf
Envoyé : lundi 6 juin 2016 11:20
À : [hidden email]
Objet : Re: [Aerogear-users] iOS Push issue when having multiple Installations

 

Hi,

 

I think you are hitting a a bug. in the 1.1.0 series we did add a catch for reported invalid tokens:

 

-Matthias

 

On Mon, Jun 6, 2016 at 11:14 AM, Bourillon, Matthias <[hidden email]> wrote:

Hello,

We are facing an issue while using Aerogear Push Server with an iOS variant.

Here is the scenario :

1.       We have 89 installations registered against an iOS Production Variant

2.       We send a message

3.       No one receive the message on our iOS App

4.       We disable ALL installations but 1

5.       We send a message

6.       The 1 device receives the push notification and works as expected

 

We have other iOS variants with thousands of registrations working without any problem like this.

 

Can the number of registered device impact the sending behavior? Can a wrong token or anything else block the notification sending to Apple? Logs do not seem to complain about any particular issue.

We are using Aerogear Push Server 1.0.0.

 

Thanks,

Matthias


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users



 

--


_______________________________________________
Aerogear-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/aerogear-users
Loading...